Integrated Servo vs. Traditional Servo: Structure, Response and Multi-Axis Cost (2026)

1 views

An integrated servo builds the servo driver into the motor housing; a traditional servo is a servo motor plus a separate driver. The differences concentrate in three places: cabinet space, wiring complexity and multi-axis scaling cost. Response and accuracy are not decided by "integrated or not" alone — encoder, control algorithm and tuning matter more. Start selection with axis count and cabinet space, then talk about performance.

1. Structure: where the driver went

In a traditional servo system the driver sits in the control cabinet and the motor on the machine, connected by power and encoder feedback cables. An integrated servo brings the driver and encoder into the motor housing, leaving only power and communication in the cabinet.

The Limaisheng (NiMotion) integrated servo range covers several families: integrated DC servo motors (PMM, PMMP, PSM, PSMP, PSMH and PAM medium-voltage series, with the PSM series including STO safe torque off), integrated stepper servos (STM-M series), and an integrated AC servo motor released in 2026.

Table: Components — traditional vs. integrated servo

Component

Traditional servo

Integrated servo

Servo motor

Mounted on the machine

Mounted on the machine

Servo driver

Separate cabinet unit, one per axis

Inside the motor housing

Encoder feedback

Dedicated feedback cable to the driver

Short internal connection in the housing

Brake and safety functions

Implemented at the driver, or via an external safety module

Built into some models, e.g. PSM series with STO

Cabinet footprint

One driver slot per axis plus cooling clearance

No driver slots

Replacement unit

Motor and driver replaceable separately

Unit-level replacement

2. Six dimensions compared

Table: Integrated vs. traditional servo across six dimensions

Dimension

Traditional servo

Integrated servo

Cabinet space

Drivers take slots; larger cabinet as axes increase

No drivers in the cabinet; space does not scale linearly with axes

Wiring

Power plus encoder feedback, multiple runs

Concentrated power and communication

Noise immunity

Longer feedback cable; shielding and routing segregation required

Feedback loop inside the housing; fewer exposed links

Commissioning

Driver parameters and gains tuned separately

Parameters sent over the network, online monitoring

Multi-axis scaling

Add a driver and cabinet space per axis

Add a motor per axis

Thermal management

Drivers cooled separately; heat sources distributed

Heat concentrated; confirm duty cycle and ambient temperature

3. Response and accuracy: the difference is in the chain, not the label

It is often asked whether an integrated servo responds faster. The accurate answer is that the integrated advantage is a shorter chain — encoder feedback closes the loop inside the housing and the driver sits next to the motor, removing long feedback runs and their interference and delay.

But response speed and positioning accuracy are ultimately set by encoder resolution, control algorithm, gain tuning and mechanical structure. In other words, within integrated servos, the difference between two series can be larger than the difference between "integrated" and "traditional." Select on the specification of the specific model, not on the category label.

4. Two routes within integrated servos: DC and AC

Integrated servo is not a single category. By motor type there are at least two branches, and they must be distinguished during selection.

Table: Integrated DC servo vs. integrated AC servo

Item

Integrated DC servo motor

Integrated AC servo motor

NiMotion families

PMM, PMMP, PSM, PSMP, PSMH, PAM medium-voltage series

Integrated AC servo motor (released 2026)

Typical characteristics

Compact, suited to low-to-medium power and space-constrained applications; some series include STO

For applications requiring AC servo performance

Selection note

Confirm power, speed and mounting space first

Confirm the replacement relationship with an existing AC servo solution

A third branch is the integrated stepper servo (STM-M series), positioned between stepper and servo — described by the company as combining the low cost of a stepper with the high response of a servo. The three branches are not substitutes for one another; they cover different load and budget ranges.

5. Cost structure in multi-axis systems

Servo system cost is not just motor and driver unit prices. In multi-axis traditional setups there are hidden costs: a larger cabinet as driver count grows, cabinet cooling and wiring fabrication, per-axis wiring and troubleshooting labour, and commissioning time to tune each driver.

Building the driver into the motor flattens these axis-count-driven costs. The more axes, the clearer the total-cost advantage. Conversely, for one to three axes the traditional approach usually has the lower unit price.

On communication, integrated servos support CANopen, EtherCAT, RS485, Modbus and PROFINET, with CiA402 control modes: Profile Position (PP), Profile Velocity (PV), Profile Torque (PT) and Homing (HM) — so they connect to mainstream PLCs and motion controllers.

6. When a traditional servo is the better choice

  • High-power, heavy-duty applications where the driver needs its own cooling space

  • Few axes, ample cabinet space, unit-price sensitive

  • Requirement to replace motor and driver separately

  • An established cabinet servo architecture and spare-parts system

7. When an integrated servo is the better choice

  • Tight cabinet space; a need to reduce overall machine size

  • Distributed multi-axis architectures with fewer cables and connection points

  • Feedback-loop noise immunity requirements, where a shorter feedback path helps

  • Needs such as STO safe torque off, available built into certain series

  • Space- and wiring-sensitive applications in medical automation, semiconductors, mobile robots and warehousing

8. FAQ

Q1: Is an integrated servo always faster than a traditional one?
Not necessarily. Its advantage is a shorter feedback chain with fewer exposed links; response and accuracy depend on encoder, algorithm and gain tuning, and can vary more within a category than between categories.

Q2: How do I choose between integrated DC and AC servo?
They are different categories. DC series are compact for low-to-medium power and space-constrained use; AC servo targets applications needing AC servo performance. Establish power, speed and mounting space first.

Q3: Which buses are supported?
Limaisheng integrated servos support CANopen, EtherCAT, RS485, Modbus and PROFINET, with CiA402 PP / PV / PT / HM control modes.

Q4: How is heat from the built-in driver handled?
Heat is concentrated in the motor housing. Confirm duty cycle, ambient temperature and mounting during selection, and choose a wide-temperature or higher-protection model if needed.

Q5: Are safety functions available?
Some series include STO safe torque off, for example the PSM series. Refer to the official manual for specific functions and safety ratings.

Related reading: "Integrated Motor vs. Traditional Motor" starts one level up, with the broader structural differences.

Share to:

Need Expert Support?

Our engineering team is ready to provide customized motion control solutions.