Restore the COB-ID of a modified PDO object
I. Functions and Precautions
(1) Function Description: Improper operation by the user may result in the modification of the COB-ID for a PDO object. This document demonstrates how to restore the COB-ID of a PDO object using CAN messages.
(2) Precautions: <1> For more detailed instructions on using PDOs, please refer to the "PDO Messages" section in the communication manual provided with your product.
II. Relevant Parameters
(1) 1800h, 1801h, 1802h, 1803h: TPDO communication objects; (2) 1400h, 1401h, 1402h, 1403h: RPDO communication objects.
For the specific definitions of these parameters, please refer to the "Object Dictionary" chapter in the communication manual.
For each of the parameters listed above, sub-index 01h corresponds to the COB-ID. Its specific value depends on the associated identifier, as shown in the figure below:

III. Message Composition
(1) Add a message row and enter the relevant message content.

23: Function code (write 4 bytes)
00 18 01: Index 1800:01 (TPDO1 address)
81 01: 0x180 + motor address (0181 for motor 1)




















